BH1750FVI Digital Light Intensity Sensor
The built-in diffuser dome helps insure you get an accurate reading and you are not measuring a point light source. The Lux is an SI unit for illuminance and is equal to one lumen per square meter. The BH1750FVI sensor directly gives output in Lux. The spectral response function of the sensor is approximately close to that of the human eye. The sensor output can be accessed through an I2C interface.
The I2C address is changeable by either grounding or connecting ADDR to VCC. The include wires make it quick and easy to hook up to your project.
- Supply Voltage: 3-5V
- Current Draw: 120uA
- Interface: I2C
- Build in pull-ups (SDA i SCL)
- Range: 1 - 65535 lux
- Vcc - supply voltage
- SCL - I2C clock
- DAT - I2C data
- GND - ground
- ADDR - I2C address. Low for 0x23 (default), high for 0x5C