Goot Soldering Paste (10g)

How to use:

1. Using the end of a match or toothpick, apply a little soldering paste to the leads that will be soldered
2. Place the soldering iron tip over the leads. Contact the solder against these leads. Heat the solder till it flows freely, then quickly move the soldering iron and solder away

How to clean:

• Using the cotton swab apply a little IPA (isopropyl alcohol) on the stain and wipe it off using tissue paper or a piece of cotton. Remove it completely to avoid surface corrosion

Note:

• This soldering paste is acidic. Flux residue should be removed toa void surface corrosion. Not water-soluble
• BS-10 is not suitable for use on PCBs. Applying BS-10 to printed circuit boards could result in electric leakage leading to fire as BS-10 contains electrolyte (a conductive substance)
• Do not dip the soldering iron tip directly into the soldering paste
  

Features:

• Vaseline: 80-90%
• Zinc Chloride: 4-6%
• Ammonium Choride: 1-3%
• Paraffin: 6-9%
• Water: 2-4%