2.8" SPI TFT LCD Touch Screen Module

Product Code: 0807
Manufacturer Part Number: MSP2807
Availability: In Stock
     0 reviews  |  Write a review
This SPI TFT display is big (2.8″ diagonal) bright and colorful! 240×320 pixels with individual RGB pixel control, this has way more resolution than a black and white display.

The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than the 8-bit mode. In addition, 4 pins are required for the touchscreen (2 digital, 2 analogs).

This 2.8 inch SPI Touch Screen Module is wrapped up into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you’re going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images.


  • Screen: 2.8" SPI Serial
  • Display Area: 43.2mm x 57.6mm
  • Size: 50 x 86mm
  • Driver Element: a-Si TFT active matrix
  • Pixel Arrangement: RGB vertical stripe
  • Driver IC: ILI9341
  • Backlight: White LED
  • Viewing Direction: 6 o’clock
  • Color Depth: 262K/65K
  • Resolution (dots): 240RGB x 320Dots
  • 5V compatible, use with 3.3V or 5V logic
  • Need at least 4 IOs from your MCU
  • With PCB plate (including power supply IC, SD), compatible with 5110 interface
  • 2.8" SPI TFT LCD Touch Screen Module x 1
  • Touch Pen x 1

Write a review

Note: HTML is not translated!