Raspberry Pi Build HAT Power Supply (48W)

Product Code: 1083
Manufacturer: Raspberry Pi
Availability: In Stock
     0 reviews  |  Write a review
Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® Technic™ motors, as well as your Raspberry Pi computer.

Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.


  • Output

    • Output voltage: +8.0V DC
    • Minimum load current: 0.01A
    • Nominal load current: 6.0A
    • Maximum power: 48.0W
    • Load regulation: ±5%
    • Line regulation: ±5%
    • Ripple & noise: 200mVp-p
    • Rise time: 100ms maximum to regulation limits for DC outputs
    • Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
    • Protection: Short circuit protection / Overcurrent protection / Overvoltage protection
    • Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
    • Output cable: 1.5m 16AWG
    • Output connector: Barrel connector, 5.5mm × 2.1mm × 11mm, Center positive
  • Input

    • Voltage range: 100-240Vac (rated), 96-264Vac (operating)
    • Frequency: 50/60Hz ±3Hz
    • Current: 1.2A maximum
    • Power consumption (no load): 0.1W maximum
    • Inrush current: No damage shall occur and the input fuse shall not blow


Write a review

Note: HTML is not translated!