Raspberry Pi Pico Learning Kit
Raspberry Pi Pico Learning Kit
Product Code: 1029
Manufacturer Part Number: X2-0009
Availability: In Stock
Manufacturer Part Number: X2-0009
Availability: In Stock
$45.99CAD
This Raspberry Pi Pico Learning Kit includes the commonly used components necessary to complete the exercises in the Official Raspberry Pi Pico Guide: Get Started with MicroPython on Raspberry Pi Pico.
The Raspberry Pi Pico is a microcontroller board based on the Raspberry Pi RP2040 microcontroller chip. It has been designed to be a low-cost,
high-performance microcontroller board with flexible digital
interfaces. The Raspberry Pi Pico features two ARM Cortex-M0+ cores run
up to 133MHz; 256KB RAM; 30 GPIO pins; and a broad range of interfacing
options. This is paired with 2MB of onboard QSPI Flash memory for code
and data storage.
Feature:
- RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom
- Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
- 264kB of SRAM, and 2MB of on-board Flash memory
- Castellated module allows soldering direct to carrier boards
- USB 1.1 Host and Device support
- Low-power sleep and dormant modes
- Drag & drop programming using mass storage over USB
- 26 multi-function GPIO pins
- 2× SPI, 2× I2C, 2× UART, 3× 12-bit ADC, 16× controllable PWM channels
- Accurate clock and timer on-chip
- Temperature sensor
- Accelerated floating point libraries on-chip
- 8 × Programmable IO (PIO) state machines for custom peripheral support
Includes:
- 830 Tie Point Full Size Breadboard (White) x 1
- Premium Female/Female Jumper Wire (20cm) x 10
- Premium Female/Male Jumper Wire (20cm) x 10
- Round Tactile Button Switch (Yellow Momentary) x 1
- Round Tactile Button Switch (Red Momentary) x 1
- Round Tactile Button Switch (Green Momentary) x 1
- Break Away Male Headers (Straight) x 2
- 330 Ohm 5% 1/4W Through Hole Resistors (Pack of 10) x 1
- Breadboard Male/Male Jumper Wire Pack (65pcs) x 1
- HC-SR501 PIR Motion Sensor x 2
- 16x2 Character LCD Display Module (I2C White on Blue Backlight 5V) x 1
- Rotary Potentiometer (10K Ohm Linear) x 1
- Basic 5mm LED Red x 5
- Basic 5mm LED Green x 5
- Basic 5mm LED Yellow x 5
- Raspberry Pi Pico RP2040 x 1
- SFM-20B Piezo Buzzer (3-24V) x 1
- USB A to Micro B Cable (1.5ft) x 1
- 8-Bit WS2812 5050 RGB LED Driver Development Board x 1
Documents:
X2 Robotics © 2025. All Rights Reserved.