Your shopping cart is empty!
Tel: +1 (416)-800-8386
- Hello, Sign in
Shopping Cart - 0 item(s) - $0.00CAD
Stepper Motor NEMA 14 with Wire (10V 500mA)
Stepper Motor NEMA 14 with Wire (10V 500mA)
-74x74.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-74x74.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-74x74.gif "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-74x74.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-74x74.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-500x500.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-500x500.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-500x500.gif "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-500x500.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
-500x500.jpg "Stepper Motor NEMA 14 with Wire (10V 500mA)")
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver.
Our 5 mm universal mounting hub can be used to mount objects on the stepper motor’s 5 mm-diameter output shaft, and our NEMA 14 aluminum bracket offers a variety of options for mounting this stepper motor in your project.
Specifications
- Size: 35 mm square × 28 mm, not including the shaft (NEMA 14)
- Weight: 140 g (5 oz)
- Shaft diameter: 5 mm “D”
- Steps per revolution: 200
- Current rating: 500 mA per coil
- Voltage rating: 10 V
- Resistance: 20 Ω per coil
- Holding torque: 1 kg-cm (14 oz-in)
- Inductance: 13.5 mH per coil
- Lead length: 30 cm (12″)
- Output shaft supported by two ball bearings
More specifications are available in the datasheet (185k pdf).
Dimensions
The following diagram shows the stepper motor dimensions in mm. The dimension labeled “length” is 28 mm. The output D-shaft has a length of 21 mm and a 5 mm diameter with a section that is flattened by 0.5 mm. This shaft works with our 5 mm universal mounting hub.
Stepper Motor Applications
Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:
- Printers
- CNC machines
- 3D printer/prototyping machines (e.g. RepRap)
- Laser cutters
- Pick and place machines
- Linear actuators
- Hard drives
Dimensions
| Size: | 35 mm square × 28 mm1 |
|---|---|
| NEMA size: | 14 |
| Weight: | 140 g |
| Shaft diameter: | 5 mm |
General specifications
| Shaft type: | 5 mm "D" |
|---|---|
| Current rating: | 500 mA2 |
| Voltage rating: | 10 V |
| Holding torque: | 14 oz·in |
| Steps per revolution: | 200 |
| Resistance: | 20 Ohm2 |
| Inductance per phase: | 13.5 mH |
| Number of leads: | 4 |
| Lead length: | 30 cm |
Notes:
Documents:
About Us
X2 Robotics is a supplier of electronic parts and components in Canada. We carry a large selection of open source electronics such as Adafruit, Arduino, Pololu, Raspberry Pi, SparkFun and more. We ship orders to anywhere in Canada or the United States.
Information
Customer Service
My Account
Our Address
X2 ROBOTICS
P.O. Box 37052
RPO Centerpoint
North York, Ontario
Canada M2M 4J8
X2 Robotics © 2025. All Rights Reserved.