Leonardo R3 Compatible Board with USB Cable
Leonardo R3 Compatible Board with USB Cable
This Leonardo is an Arduino-compatible microcontroller board based on the ATmega32u4. Compared to other
versions of this using a separate USB-Serial converter chip, the Leonardo
uses a single-chip solution. Only with a Atmega32u4 USB
communication and control. The Leonardo differs from all preceding
boards in that the ATmega32u4 has built-in USB communication,
eliminating the need for a secondary processor. This allows the Leonardo
to appear to a connected computer as a mouse and keyboard, in addition
to a virtual (CDC) serial/COM port. It also has other implications for
the behavior of the board. Greatly improve the applications. Leonardo
need the new version above IDE1.01.
Features:
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7V-12V
- Input Voltage (Limits): 6V-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current Per I/O Pin: 40mA
- DC Current for 3.3V Pin: 50mA
- Flash Memory: 32KB (ATmega32u4) of which 4KB used by bootloader
- SRAM: 2.5KB (ATmega32u4)
- EEPROM: 1KB (ATmega32u4)
- Clock speed: 16MHz
Note: This is an Arduino-comptabile product, meaning it is not a Made in Italy Arduino. Arduino hardware and software are open source, so high quality
Arduino-compatible hardware may be made by multiple vendors. Please
ensure that all support issues for Arduino-compatible products are
addressed to us.
X2 Robotics © 2024. All Rights Reserved.