Uno WiFi R3 Compatible Board
Uno WiFi R3 Compatible Board
Product Code: 0840
Availability: In Stock
Availability: In Stock
$14.69CAD $20.99CAD
Wemos, the leading manufacture for low-cost wireless breakout boards
that are compatible with Arduino microcontrollers, has made it easier
for users to use their device by integrating onto a Arduino Uno board.
This Wemos compatible board features a CH340G for the USB communication,
so you may want to install the drivers necessary to be able to program
this board. The standard printer port USB B connectors have been changed
to Micro USB B connectors for convenience. This board also features a
u.Fl connector if you want to extend the range of the antenna.
This microcontroller features the ESP8266 with 32Mb of memory and a ATmega328 SMT. They even provided special dip pins to toggle the settings for the esp to work with the Arduino or work individually.
DIP-Switch:
| Connection | DIP | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| ATmega328<->ESP8266 | ON | ON | OFF | OFF | OFF | OFF | OFF |
| USB <->ATmega328 | OFF | OFF | ON | ON | OFF | OFF | OFF |
| USB<->ESP8266 (Update Firmware or Sketch) | OFF | OFF | OFF | OFF | ON | ON | ON |
| USB<->ESP8266 (Communication) | OFF | OFF | OFF | OFF | ON | ON | OFF |
| All Independent | OFF | OFF | OFF | OFF | OFF | OFF | OFF |
DRIVER LINK: http://www.wch-ic.com/downloads/CH341SER_EXE.html
Note: This is an Arduino-comptabile product, meaning it is not a Made in Italy Arduino. Arduino hardware and software are open source, so high quality
Arduino-compatible hardware may be made by multiple vendors. Please
ensure that all support issues for Arduino-compatible products are
addressed to us.
X2 Robotics © 2026. All Rights Reserved.


-74x74.jpg)
-74x74.jpg)
-74x74.jpg)
-74x74.jpg)


