ICE Tower CPU Cooling Fan for Raspberry Pi

Note: The Raspberry Pi is not included.

How to assemble:

Raspberry Pi 4B

• 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws.
• 2. Fixed the steel mounting fixer to Raspberry Pi 3B+’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
• 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
• 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Raspberry Pi 3B+

• 1. Fixed the steel mounting fixer to radiator's heat dissipation cube with M2.0 screws.
• 2. Fixed the steel mounting fixer to Raspberry Pi 4B’s mounting hole with M2.5 copper stick, and please make sure the heat dissipation is contact to CPU shield properly.
• 3. Fixed the copper stick to Raspberry Pi with M2.5 nuts.
• 4. Connect the red wire to GPIO 5V pin and black wire to GPIO GND pin.

Features:

• DC 5V Power in (Can be powered by the Raspberry Pi)
• Ice Tower Structure
• 5mm copper tube
• Super heat dissipation
• Rated power 0.4W @5V, 0.08A
• Super Cool fan background light (RGB Color)
• Easy to setup
• Compatible with Raspberry Pi 3B+/4B

Includes:

• Ice Tower Cooling Fan x 1
  
• Steel Mounting Bracket x 2
  
• M2.5x6 Copper Stick x 8
  
• M2.5 Nut x 4
  
• M2.5x4 Screw x 6
  
• Thermal Tape x 3
  
• Screw Driver x 1
  
• Protective Acrylic Panel x 1
  

Documents:

• Datasheet