Stepper Motor NEMA 23 with Wire (5.7V 1A/Phase)

Product Code: 0460
Availability: In Stock
$41.99CAD
     0 reviews  |  Write a review

This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in).

This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.

Specifications

  • Size: 56.4 mm square × 41 mm, not including the shaft (NEMA 23)
  • Weight: 450 g (16 oz)
  • Shaft diameter: 6.35 mm (0.25″) “D”
  • Steps per revolution: 200
  • Current rating: 1 A per coil
  • Voltage rating: 5.7 V
  • Resistance: 5.7 Ω per coil
  • Holding torque: 4 kg-cm (55 oz-in)
  • Inductance: 5.4 mH per coil
  • Lead length: 30 cm (12″)
  • Output shaft supported by two ball bearings

More specifications are available in the datasheet (50k pdf).

Dimensions

The following diagram shows the stepper motor dimensions in mm. The output shaft has a 0.25″ (6.35 mm) diameter. Though not shown in the diagram, the output is a D-shaft with a section that is flattened by 0.5 mm. This shaft works with our 1/4″ universal mounting hub and 1/4″ scooter wheel adapter.


Stepper Motor Applications

Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:

  • Printers
  • CNC machines
  • 3D printer/prototyping machines (e.g. RepRap)
  • Laser cutters
  • Pick and place machines
  • Linear actuators
  • Hard drives

Dimensions

Size: 56.4 mm square × 41 mm1
NEMA size: 23
Weight: 450 g
Shaft diameter: 6.35 mm

General specifications

Shaft type: 1/4 inch "D"
Current rating: 1000 mA2
Voltage rating: 5.7 V
Holding torque: 55 oz·in
Steps per revolution: 200
Resistance: 5.7 Ohm2
Inductance per phase: 5.4 mH
Number of leads: 6
Lead length: 30 cm

Notes:

1. Not including the shaft
2. Per coil

Documents:

Write a review

Note: HTML is not translated!
Captcha