DC-DC Step Down Power Supply Adjustable Module with LCD Display
DC-DC Step Down Power Supply Adjustable Module with LCD Display
Product Code: 0272
Availability: In Stock
Availability: In Stock
$8.49CAD $12.09CAD
This is a DC-DC Step
Down Power Supply Adjustable Module With LCD Display, the display using
STN liquid crystal display screen, voltage and current can be displayed
simultaneously, blue background and white character, wide angle and wide
field of view. It start used button to adjust voltage, left button to
reduced the voltage, the right button to increasing voltage, press
button once can adjust 0.04V voltage, if you hold more than 1s, you can
quickly adjust voltage. Calibration method: under power off situation, holding left button and power the supply, when the display begin
flashing, release left button, with multimeter measuring the output
voltage, by press the left and right button, adjust the multimeter
measuring voltage near 5V, such as 5.00V, 4.98V or 5.02V is OK too, at
this situation, please ignore the displaying on this item. After
adjustment, please power off it and then power to it again, then the
calibration is completed. Errors can be calibrated in 0.04V, if the
error is greater, you can try to calibrate it again.
Features:
- Converter Type: DC-DC
- Input Voltage: 5~23V (best voltage 20V)
- Output Voltage: 0V~16.5V (continuously adjustable)
- Peak Current: 3A
- Mainboard Size: 50mm x 31mm x 14mm (LxWxH)
- Display Module: STN LCD
- LCD Size: 37mm x 17mm (LxW)
- LCD Accuracy: 1%
- Conversion Efficiency: 95%
- Load Regulation S(I): <= 0.8%
- Voltage Regulation S(U): <= 0.8%
X2 Robotics © 2026. All Rights Reserved.


-74x74.jpg)
-74x74.jpg)
-74x74.jpg)


