Temperature and Humidity Sensor - Wired Enclosed Shell (SHT30)

Product Code: 1043
Availability: Out Of Stock
$11.09CAD
     0 reviews  |  Write a review
The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.

The enclosed box is a Sensiron SHT-30 digital sensor, but with the 4 data/power wires brought out to bare wires. Any SHT-3x code for a microcontroller will work, we are big fans of this sensor.

The 1 meter long cable has four wires: Red = VCC (2.15-5VDC), Black = Ground, Yellow = I2C Clock, White = I2C Data.

Simply connect the red and black wires to your microcontroller or microcomputer power + ground. Connect the yellow wire to SCL, white wire to SDA of your controller's I2C port. There are built in 10K resistors so you don't need external I2C pull-ups.

Compared to the DHT22/AM2302, this sensor is more precise, more accurate, works in a bigger range of temperature/humidity and is less expensive! We strongly recommend using this instead of DHT sensors, they are very annoying to use and this sensor is a true I2C sensor so it is universally supportable.

Features:

  • Sensor Module Dimensions: 59mm x 26.3mm x 13.4mm
  • Wire Length: ~22.8cm / ~9"  
  • Power: 2.15~5.5V
  • Humidity: 0~100%RH
  • Temperature: -40~125ºC
  • Precision: +/- 2%RH ~ +/- 0.2ºC
  • Output: Digital IIC

Documents:

Write a review

Note: HTML is not translated!
Captcha